Release Details
Fields |
Details |
---|---|
Name |
Peplink |
Version |
5.0.0 |
Supported On |
LogPoint v6.6.0 and later |
Release Date |
2021-01-20 |
Document Date |
2021-01-20 |
Download | Peplink_5.0.0.pak |
SHA256 |
53b5082e3ea48fe9f634ecedf3e6e16b3376ab800feca2756ddfc4ec43e05923 |
Package Details
The application consist of the following components:
- Dashboard Package
- LP_Peplink
- Normalization Package
- LP_Peplink
General Description
The Peplink application normalizes Peplink events and enables you to analyze Peplink data using a pre-set dashboard. You can further customize the dashboard and searches to perform an in-depth analysis.
Installation
Follow these steps to install the Peplink v5.0.0 application:
- Download the Peplink package from the Download section above.
- Add the required Peplink as a device in LogPoint.
- Create a collection policy with the Syslog collector and an appropriate processing policy.
- Assign the policy to the device.
Supported Device
The device supported by the Peplink with LogPoint in this configuration is:
- Peplink 580 Firmware 7.x
Log Format
Peplink
Expected Log Format
Key = Value with space as a delimiter
Log Sample
<1>Jan 21 16:23:34 xxxxx Allowed CONN=lan MAC=11:11:11:11:11:11:11:11:11:11:11:11:00 SRC=xxx.xxx.x.xx DST=xxx.xxx.x.xx LEN=xx TOS=0x00 PREC=0x00 TTL=xxx ID=xxxx PROTO=UDP SPT=xxxx DPT=xxxx LEN=xx MARK=0xd
To export data to LogPoint, use the Syslog collector on port 514 of the LogPoint server.
Support
If you have any queries or require assistance, please feel free to contact our support team:
Email: servicedesk@logpoint.com
Phone: +45 7060 6100
Best regards,
Comments
Article is closed for comments.