Modules

Logpoint Agent (Standalone) supports the following modules:

1. Extension modules: xm_admin, xm_soapadmin, xm_charconv, xm_exec, xm_json, xm_perl, xm_syslog, xm_csv, xm_filelist, xm_fileop, xm_kvp, xm_multiline, xm_pattern, xm_rewrite, xm_w3c, xm_xml.
2. Input modules: im_batchcompress, im_file, im_fim, im_msvistalog, im_regmon, im_ssl, im_tcp, im_zmq, im_exec, im_internal, im_kernel, im_mark, im_perl, im_udp, im_uds, im_null.
3. Output modules: om_batchcompress, om_ssl, om_tcp, om_zmq, om_exec, om_file, om_perl, om_udp, om_udpspoof, om_uds, om_null.
4. Processor modules: pm_buffer, pm_pattern, pm_evcorr, pm_norepeat, pm_null.

Supported Platforms

The provided installer supports:

• Windows 2019, Windows 2022, Windows 2025

Installation and Configuration

For new installation:

1. Install Logpoint Agent (Standalone):

   1. Run the .msi installer of Logpoint Agent (Standalone).

2. Configure Logpoint Agent (Standalone):

   1. Edit C:\Program Files\lpagentstandalone\conf\lpagentstandalone.conf and make the necessary configuration changes. For configuration examples and guidance, refer to the NXLog documentation.

3. Verify operation:

   1. Save changes and restart the lpagentstandalone service.

   2. Confirm logs are being collected and forwarded as expected.

If you are currently using NXLog v6.7.9957, you must reinstall the agent under the Logpoint Agent (Standalone) name to align with the rebranding:

1. Back up the NXLog configuration file:

   1. Copy C:\Program Files\nxlog\conf\nxlog.conf to a secure location.

2. Uninstall NXLog:

   1. Open Control Panel > Programs > Programs and Features.

   2. Select NXLog and click Uninstall.

3. Install Logpoint Agent (Standalone):

   1. Run the .msi installer of Logpoint Agent (Standalone).

4. Restore the configuration:

   1. Open C:\Program Files\lpagentstandalone\conf\lpagentstandalone.conf.

   2. Copy the necessary configuration settings from your nxlog.conf backup into lpagentstandalone.conf. Make sure to define the INSTALLDIR, CONFDIR, and MYLOGFILE macros as follows:

      define INSTALLDIR C:\Program Files\lpagentstandalone

      define CONFDIR %INSTALLDIR%\conf\lpagentstandalone.d

      define MYLOGFILE %LOGDIR%\lpagentstandalone.log

For detailed configuration guidance, refer to the NXLog documentation.

5. Verify the configuration:

   1. Save your changes and restart the lpagentstandalone service.

   2. Confirm that logs are being collected and forwarded correctly.

Support

If you have any questions or require assistance, create a support ticket.